Manufacturer-direct · Our own factory in Taizhou, China
Boiling & Chilled
Water Tap
Engineered, tooled and built in our own kitchen tap factory.
One kitchen tap on the worktop. Boiling water at 98°C, chilled filtered water, and the normal hot and cold you already have — served by two under-counter machines and a filter that we design, assemble and test ourselves.
- 98°C
- Boiling delivery
- 1.5–5 bar
- Mains inlet
- 3 / 2 yr
- Tap / machine warranty
- 6
- Surface finishes
Own factory in Taizhou, China Manufacturing for kitchen brands in the UK, USA, EU & Australia Approvals published per model only once confirmed in writing Supplied to UK · Ireland · Australia · USA · Malaysia
Under the sink
What actually sits under
the kitchen sink
Two independent machines and a filter stage, plumbed to a single kitchen tap. Each module is specified, quoted and warranted separately, so a project can be configured boiling-only or boiling plus chilled.
-
Boiling machine
188.2 × 188.2 × 260.7 mm
2 × G 3/8" outlets, top-mounted
-
Chilled machine
440 × 188 × 306.2 mm
R600a refrigerant, side service ports
-
Anti-scale filter
105 × Ø66.5 × 295.4 mm
230 mm bowl clearance to change
Three modules side by side need about 833 mm once service clearance is allowed for. A standard 600 mm sink base gives about 564 mm and an 800 mm base about 764 mm, so a complete boiling-and-chilled system is normally planned across two cabinet bays. We publish the drawings so this is settled before anything is ordered.
Under-counter drawings
The range
One tap body,
six surface finishes
Every tap: child-safe self-returning cartridge,
precision ceramic cartridge, Neoperl aerator.
-
14001
Boiling, chilled and normal hot & cold
-
24012
Electronic control, tallest spout in the range
-
13001
Boiling with normal hot & cold
-
12001
Dedicated boiling tap, compact body
-
Chrome -
Brushed Brass -
Matt Black -
Gunmetal -
Brushed Nickel -
Copper
Finishes shown as renders from the chrome original. Physical samples on request.
Specifications
Specifications and where the limits are
| Model | Overall height | Clear spout height | Reach |
|---|---|---|---|
| 14001 | 397.3 mm | 230.4 mm | 200 mm |
| 24012 | 415.9 mm | 252.1 mm | 200 mm |
| 13001 | 360.3 mm | 225.4 mm | 186 mm |
| 12001 | 248.6 mm | 155.6 mm | 139 mm |
Tap hole diameter is issued per model on the installation drawing, not published here.
- Boiling delivery 98°C
- Mains inlet 1.5–5 bar
- Boiling element 1500 W (2.4 L)
- Chiller draw 120–170 W
- Filter service 3–6 months or 2000 L
- Child-safe self-returning cartridge
- Precision ceramic cartridge
- Neoperl aerator
WRAS
UK water fittings approval. Being confirmed in writing model by model, including the certificate holder.
CE / CB
Electrical safety for the under-counter machines. Being confirmed in writing model by model.
WaterMark
Australian plumbing certification. Being confirmed in writing model by model; the Australian brass specification is quoted separately.
Current status — being confirmed in writing
We publish a model against a mark only once it is confirmed on paper. Email us for the current position.
By application · territory allocated
Founding Distributor Programme
We are appointing our first authorised distribution and installation partners in the United Kingdom, Ireland and Australia. Places are allocated by territory and by application — this is not an open reseller list.
- 01
Territory allocation
A defined area held for you while the programme runs, agreed in writing.
- 02
Sample support
Working display units and physical finish samples for your kitchen showroom.
- 03
Product and installation training
Delivered to your sales floor and your fitting teams, with the drawing set.
- 04
Joint marketing assets
Photography, specification sheets and display material, produced with you.
- 05
End-customer enquiries routed to you
Kitchen enquiries we receive from your territory are passed straight across.
- 06
Direct engineering contact
Specification questions answered by the factory, not by a middle layer.
Who we are looking for
- Kitchen showrooms and studios
- Plumbing and water-treatment specialists
- Kitchen appliance and fittings importers
- Installation companies with kitchen fitters
Apply to become a founding partner
Tell us who you are and which territory you cover. Commercial terms are confirmed in writing per model and per order.
For homeowners
Buying one for your own kitchen?
We do not sell direct to households. Leave your details and we pass you to an authorised installation partner in your area, who surveys, installs and supports the tap.
Trade enquiry
Distribution, OEM and specification enquiries. Tell us the market you sell into and what you are trying to configure.
- Taizhou
- Our own factory, China
- Direct
- No importer in between
- 4
- Kitchen tap bodies
- 5
- Markets currently supplied